Dc Power Supply, Triple Output, Meters 2 Digital Led Switchable, Voltage Output #1 Variable 0 To 24 Vdc, Current Output #1 0 To 0.5 Amp, Voltage Output #2 Variable 0 To 24 Vdc, Current Output #2 0 To 0.5 Amp, Voltage Output #3 Fixed 5 Vdc, Current Output #3 4 Amps, Line Regulation Less Than 0.01% +3 Millivolts, Load Regulation Less Than 0.01% +3 Millivolts, Includes 3 Pair Test Leads, Instructions

FEATURES: 12 VDC, 9 OUTPUTS INTEGRAL SURGE PROTECTED 800 mA PER OUTPUT 100V-240V OPERATION CAN BE USED ANYWHERE IN THE WORLD* * w/ appropriate UL or foreign CE power cord ON / OFF SAFETY SWITCH WITH LED VENTED HOUSING FOR COOLER OPERATION 3 CONDUCTOR POWER CORD INCLUDED (US TYPE) 9 INDIVIDUAL PTC OUTPUT PROTECTION WITH LED POWER INDICATION UNIQUE PRE-DRILLED TOP MOUNTING FLANGE ALLOWS EASY WALL MOUNTING WITHOUT ACCESS TO INSIDE OF THE UNIT OVERALL DIMENSIONS: 11.25”x 11.25”x 3.75” INCLUDES MULTI-LINGUAL INSTRUCTION SHEET

High Platform Maintenance Lift Two Person, DC Powered Accomplish maintenance safely and quickly. Slip resistant work platform is completely enclosed with 42"H guardrails with mid-rails and a 4" toe guard on 3 sides. 32"W base fits through standard doorways. Leveling jacks provide stability on uneven surfaces. Control panel is mounted on the platform. Built-in ladder with handrails provides easy access to platform in lowered position. Meets or exceeds ANSI standards. Gray enamel finish standard, or add Model #237360 to upgrade to the Safety Orange finish. This Two-Person DC Lift runs on 2 deep-cycle batteries that recharge using a 110V outlet and provide 80-100 lift cycles in between charges. Supports a 500 lb. capacity and includes four 8" casters.

24V 100W low voltage hardwire Class 2 electronic DC power supply to be used as outdoor wet location suitable power unit. Features: Input: 120v Output: 24V Wattage: 100W Minimum Load: 1W Maximum Load: 100W Includes 60ft cord The input wire has to be connected back to teh outdoor junction box of the house or building Built-in auto reset, soft start, short protection, and overload protection circuit to protect the power supply. The soft-start technology extends the LED life by preventing the abrupt inrush of current Class 2 power unit are inherently protected and power limited, protecting the lighting system from normal and abnormal short conditions For use with Invisiled 24V outdoor tape light Models: EN-O24100-RB2-T

Adic 115C 48 VOLT DC POWER SUPPLY FOR SCALAR 1000Product Details: Manufacturer: AdicItem Condition: New ItemPart Number: 115CProduct Type: PartsTechnology Category: N/ASanworks SKU#: LIB01636490 Days Unlimited WarrantyExtended Warranty AvailableOne Year Product Support with Sanworks Included100% Satisfaction or Your Money BackIn StockGot specification or compatibility questions? Please do not hesitate to E-mail us. We have 24/7 live sales and services available after-hours as well. Data Storage Specialists are standing by to assist.

You are bidding on an Adtran 1200841L1 redundant DC power supply. These power supplies are NEWOEM and come with a 5 year warranty.We are a Direct Adtran Advantage Partner with Internetworking Specialization This Item is BRAND NEW, factory sealed,from Adtran. It is NOT refurb, used, or surplus. We sell all new Adtran Netvanta items with deep discounts to you.LEAD TIMES MAY VARY ACCORDING TO AVAILABILITY ISSUES Redundant DC Power Supply module for the NetVanta 5305.Return policy The seller will n

For sale is a brand new professional DC regulated power supply from Mastech, Model number HY3003D-3. This high quality power supply has three outputs: two outputs are continously adjustable at 0-30V DC and 0-3A, and the third output is fixed at 5V DC and 3A. What's more, the two outputs can be used either in independent, series or parallel mode, providing either two independent outputs, or one output with twice the voltage or twice the current output, up to 60V or 6A. The unit comes with 4 backlit LCD displays, providing accurate and clearly visible readout for the voltage and current value. This unit has toggle switch at the back that allows you to operate it in 110V AC or 220V AC. retails well over $400. Please email us with any questions, our hard-working staff will answer every email... Less

The Model AX501 offers a 0 to 30VDC supply. It provides the ability to display both voltage and current. The AX501 offers a Coarse and Fine voltage adjustment as well as current limiting adjustment.

Protect toes from pinch points created by lift tables using these lift table edge sensing kits. These kits mount easily to the edges of a lift table and are wired to the lift table's controls so that when they sense an obstruction, they will immediately stop the lift table. These sensing edges are activated with as little as 4.5 lbs of pressure which makes an incredibly easy and effective means of ensuring employee safety around lift tables. - - The edges on these strips have a PVC housing which makes them resistant to water, oil, hydraulic fluid and coolant. The switching element contained in the strip is rated for a whopping 3 million operations at any point. - - All sensing edges operate using a 4 lead fail-safe system. A very minimal current flows through the sensor at all... Less

User-friendly portable hydraulic lifts provide reliable, powerful lifting when moving and positioning loads. Economical and attractive, they're ideal for commercial or industrial uses. Includes removable chrome platform for operations requiring forks. Nonslip chain is used for accurate positioning. Units roll easily on two rigid and two swivel polyurethane casters and includes a foot operated brake. Not for use with pallets. All welded steel construction with chrome platform and uprights. Each fork is 4"W x 2"H, the fork length is the same as the platform length. Overall fork width is 22".

Protect toes from pinch points created by lift tables using these lift table edge sensing kits. These kits mount easily to the edges of a lift table and are wired to the lift table's controls so that when they sense an obstruction, they will immediately stop the lift table. These sensing edges are activated with as little as 4.5 lbs of pressure which makes an incredibly easy and effective means of ensuring employee safety around lift tables. - - The edges on these strips have a PVC housing which makes them resistant to water, oil, hydraulic fluid and coolant. The switching element contained in the strip is rated for a whopping 3 million operations at any point. - - All sensing edges operate using a 4 lead fail-safe system. A very minimal current flows through the sensor at all... Less

Dc Power Supply, Output Voltage 0-30 Volts, Output Current 0-0.25/0-1 Amps, Line Regulation 0.2% + 3 Milliamps, Line Voltage Regulation Less Than Or Equal To 0.01% + 3 Millivolts, Load Regulation Less Than Or Equal To 0.01% + 3 Millivolts, Current Limit 5%-100%, Ripple Volts Regulation Less Than Or Equal To 1 Millivolts, Single Output With Low Ripple Characteristics, 2 Analog Meters

POWER SUPPLY 24V DC 5.4A