Building Supplies

Hand and Power Tools

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Fasco Centrifugal Blower - 115 Volts 1200/1400 RPM Features Sleeve Bearings

Exhaust Ventilator, Exterior Mount, Fits Duct Dia 4 In, Cfm @ 0.100-in Sp 180, Voltage 120, 60 Hz, 1 Phase, Amps 0.84, Max Inlet Temp 140 Deg F, Housing Height 13 In, Housing Width 10 1/4 In, Housing Depth 6 In, Housing Material Galvanized Steel, Mounting Location Wall

Curtronizer NSF APPROVED OFFICE, RESTAURANT AND FREEZER STRIP CURTAIN DOOR The Perfect Door For Office Or Room Dividers, Restaurants And Freezers. The Curtronizer Strip Door is one of the fastest, easiest strip door kits in the industry. NSF Approved Strip Traffic Doors separate environments from temperature, weather, noise, dust, and other airborne pollutants, making them the perfect doors for office areas, room dividers, restaurants, walk-in coolers, and freezers. USDA Low Temperature Polar Reinforced Strips are for Cooler and Freezer door use (temperature resistant from -20 to +140 degrees F). Pre-punched 6 wide x 0.06 thick strips are mounted on 2 centers allowing for a 67% (2) overlap for secure sealing. Interior strip curtain door kits can be easily trimmed... Less

Triple Aquastat, Burner Control, Height 6 1/8 In, Depth 3 1/8 In, Width 4 1/3 In, Temp Range 130 - 240 F, Differential 10 Fixed, Full Load Amps @ 120v 7.4, Locked Rotor Amps @ 120v 44.4, Full Load Amps @ 240vac 3.7, Locked Rotor Amps @ 240v 22.2, 24v Burner Control Circuit, Burner Control Circuit @ 24v 1.25 A, Horizontal Or Vertical Mounting, High Limit, Includes Tube Of Heat Conductive Compound And Range Stops

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Hammered Address NumberThe Hammered House Number Collection will add instant pizzazz to any exterior. This hardware line is an instant head-turner with their high-quality and unique. The intricate details of these pieces emit craftsmanship that transcends centuries, making it a timeless collection. Features:Zinc Die Cast Base Material1 Screws Included

9/16ID 1-5/16OD 7/16W STNLESS STL 2PC CLAMP COL

Provides the ability to test the 3M Accuspray Spray Gun Model HG09, part number 16570, for HVLP compliance.

Mannington Marrakech Moroccan Hickory Cumin 3/8" x 2 1/4", 3" & 5" Random Width Engineered Hardwood MMH05CU1

Vestige widespread hex wrench

Also known as: AHN-4935703, HAN4935703, IRW4935703; Features and Benefits: Lock-n-Load® System for one-handed quick release Carbon steel construction sleeve and body for durability and life Patented jaw design holds bits securely on 6 flats Compatible with quick change and hex shanks Complete line up for all IRWIN accessories 

Uvex SEPTLS763S2154 Patented MMT Multi-Material Technology provides soft, cushioned comfort. Wrap-around 8-base lens design offers exceptional coverage. Ratcheting temple angle adjustment. Ventilation channels minimize fogging. Elastomer nasal pads minimize slippage.

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

20" Head Assembly - 2670 CFM 5 Mounting OptionsGuard Meets OSHA StandardsGalvaniz ed Steel Propeller15 Foot Three Conductor Supply Cord and PlugNon- oscillating, 1/15 HP, 2 Speed, 115V, 1 Phase, Totally Enclosed Air Over Ball Bearing MotorUL/CUL Listed3 Year Warranty 24.00 L. 24.00 W. 10.00 H.

HEAVY-DUTY PLASTIC STEP STANDS These step stands have non-skid self-draining steps with built-in grommets to grip the floor. 4-step stools have sturdy safety railings for ease of use. They are resistant to chemicals and corrosives. Step stools are lightweight and easy to store and transport. They are also nestable when stacked.

Tig Welder, Ac/dc, Phase 1, Output Range 3-400 Amps, Rated Output 300 A At 32 V,350 A At 34 V, 300 A At 32 V,350 A At 34 V Amps Ac, Input 146/128/65 Amps, Input Voltage 200/230/460, Ocv 80, 50/60 Hz, Includes Power Source, Rfcs-14 Hd Remote Foot Pedal, Coolmate 3x Water Cooler, No. 37 Running Gear And Dinse Connectors, Plus,4 Gallons Of Coolant, 25ft Cs310 Torch With Accessories, Regulator Flowmeter With Gas Hose, Torch Adapter, Weld Lead With Clamp.

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Hammered Address NumberThe Hammered House Number Collection will add instant pizzazz to any exterior. This hardware line is an instant head-turner with their high-quality and unique. The intricate details of these pieces emit craftsmanship that transcends centuries, making it a timeless collection. Features:Zinc Die Cast Base Material1 Screws Included

Explosion Proof High Pressure Exhaust Fan - 24" This High Pressure Exhaust Fan removes fumes, dust and smoke. Direct driven exhaust fan is ideal for mills, mines, foundries & factories. Fan blades are made of heavy duty one-piece cast aluminum to provide spark-free operation. Frame is made of heavy duty steel venturi that is completely arc welded with tubular supports. Exhaust fan features explosion proof ball bearing motor. Gray enamel finish. Single phase design. Horsepower rating based upon maximum speed/load.

Elco EP840-5A 5 Amp Current Limiter for 1 Circuit TrackFeatures:5 Amp

Brand new Allway Single Edge Razor Scraper Great for peeling, cutting and scraping unwanted material, and cleaning windows, Putty and glue can't stand before this excellent scraper, Compatible with any standard single edge blade, Total length is 3-3/4", width is 1-3/4", Total length is 3-3/4", width is 1-3/4"

1-7/16ID 2-1/4OD 9/16W STNLESS STL 2PC CLAMP COL

Ac/dc Tig/stick Welder, Output Range 5-200 Amps, Phase 1, Input Voltage 208-230, Ocv 80, 50/60 Hz, Rated Output 150a @ 26v 40% Duty Cycle, Overall Height 30 1/8 In, Overall Width 21 1/8 In, Overall Depth 21 1/2 In, For Light Fabrication And Manufacturing, Maintenance And Repair, Welds Up To 1/4 In Aluminum With Ac Tig, Standards Csa, Includes 150 Amp Torch, 12 Ft Work Cable With Clamp, Electrode Holder, Remote Foot Control, Gas Regulator And Gas Hose

9/16" BORON Hardened Steel Chain w/Sleeve, 3-1/2' Long 9/16" (14mm) BORON Hardened Steel Chain with sleeve. 3-1/2' (110cm) length (Bag Supplied) works with all XENA locks.

The D512385 Features: * Service parts kits provide quick and easy on-site service The D512385 Features: * Service parts kits provide quick and easy on-site service

Replacement Support Clamp Glass Clamp Gasket

Cornerbead Clincher W/mallet, Number Of Pieces 2, Size 16 1/4 X 7 X 5 1/2 In, Aluminum/rubber, Cast Aluminum Crimper, Wood Handled Rubber Mallet, Includes Clincher And Mallet

Wall Unit Black/Chrome - 24" "Out of Service" Yellow w/ Clamp and Belt End This Black/Chrome Clamp Mounted Tensabarrier Wall Mount Unit, measuring 3.25 inches wide and 5.5 inches tall, conveniently comes with a 24 foot long yellow belt that features the text "Out of Service" in black lettering across it's center. The unit comes complete with a separate wall receiver for attaching the end of the belt to an opposite location and wire clamp belt. This retractable barrier is perfect for blockading hallways, doorways or in sitations where conserving floor space is optimal. 8.00 L. 8.00 W. 8.00 H.

Adorn your doors, cabinets and other furniture with the rustic style of these hand-forged iron clavos. Sold in set of 6 clavos. Made of hand-forged iron. Available in three sizes: Small: 3/4" L x 3/4" W head with 1" long shank. Medium: 1-1/4" L x 1-1/4" W head with 1" long shank. Large: 1-1/4" L x 1-1/4" W head with 3" long shank. Sold in set of 6 clavos. Easy to install. Simply drill a small pilot hole and tap in with a rubber mallet. For decorative purposes only. Shown in Natural Black finish. Rust finish is actual oxidized iron, a living finish.