Lot of 9, Add IDE & SATA connectors to computer with PCI slot, 2 IDE, 2 SATA HDs Bundle Deal: You get 9 cards for this price Combo IDE(1) / SATA(2) PCI Card, Software RAID, VIA VT6421A Product Details 1x Ultra ATA133 Port (for 2 IDE HD) 2x SATA Ports (for 2 SATA HD) Chipset: VIA VT6421A SATA Software RAID 0, 1, 0+1, JBOD Supported PCI 32-bit 33MHz Interface Compliant with PCI Specification 2.2 Support PCI Bus-Master Qccess Plug & Play Totally Software Transparent with PATA & SATA Parallel ATA interface Supports Ultra DMA Mode Transfer up to Mode 6 Timing Transfer Rate up to 133MB/s 48-bit LBA Mode for Connecting HDD More Than 137GByte Supports PIO Mode 4, 2, 1 Supports up to 2-IDE (PATA) Hard Disk Serial ATA Interface Supports Serial ATA 1.0 Specification Supports up to 2-SATA Hard Disks

Two-Way IDE To SATA + SATA To IDE Converter Two-Way IDE To SATA + SATA To IDE Converter This is a bi-direction IDE an SATA converter for serial and parallel ATA translation. You may connect an IDE hard drive to your PC motherboard's SATA controller or vice versa with this Bi-Directional IDE to SATA Converter or SATA to IDE adapter! It's easy to install and there are no drivers needed. There is a mode switch for selecting this device to be used for either SATA to IDE or IDE to SATA conversion. This IDE/SATA adapter is featured with high speed 150 MB/s transfer rate, automatic SATA 3.0/1.5 Gbps speed negotiation, and support for 3.5-inch IDE hard drives as well as 5.25" optical drives . Jmicro JM20330 Chipset Plug & Play and Hot-swapping capability 150MB/s transfer rate Automatic SATA... Less

Add IDE & SATA connectors to computer with PCI slot, connects 2 IDE & 2 SATA HDs Combo IDE(1) / SATA(2) PCI Card, Software RAID, VIA VT6421A Product Details 1x Ultra ATA133 Port (for 2 IDE HD) 2x SATA Ports (for 2 SATA HD) SATA Software RAID 0, 1, 0+1, JBOD Supported PCI 32-bit 33MHz Interface Compliant with PCI Specification 2.2 Support PCI Bus-Master Qccess Plug & Play Totally Software Transparent with PATA & SATA Parallel ATA interface Supports Ultra DMA Mode Transfer up to Mode 6 Timing Transfer Rate up to 133MB/s 48-bit LBA Mode for Connecting HDD More Than 137GByte Supports PIO Mode 4, 2, 1 Supports up to 2-IDE (PATA) Hard Disk Serial ATA Interface Supports Serial ATA 1.0 Specification Transfer Rate up to 1.5GB/s Supports up to 2-SATA Hard Disks Software RAID 0, 1, 0+1, JBOD Support

Lot of 6, 2 Internal SATA II & 1 IDE Ports PCIe PCI-e PCI Express Card, JMB363 Part Number: SY-PEX50039 Bundle Deal: You get 6 for this price Connects up to two SATA II and 2 IDE hard disk drives internally Specification JMB363 chipset (JMicron Technology Corporation)\ Supports 1-Lane 2.5Gbps PCI Express Bus Ports: (Internal Native Interface Multiplexed) 2 Internal SATA II Ports 1 Internal IDE (PATA) Port All Registers Accessible in Unified Memory Space Compliant with Serial ATA AHCI (Advanced Host Controller Interface) Spec. Reversion 1.0 Compliant with Bus Master Programming Interface for IDE ATA Controllers Revision 1.0 Compliant with PCI Express Bas Spec. Revision 1.0a Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a Compliant with Serial ATA II:... Less

Brand New IDE to SATA or SATA to IDE Bidirectional Adapter FEATURES: Converts Serial ATA to Parallel ATA Converts Parallel ATA to Serial ATA Supports ATA 100/133 Compliant with Serial ATA Specification (1) 40 pin IDE Port (1) Serial ATA Port (1) 4 Pin Power Connector

Type: IDE to SATASpecification s: IDE Modes Supports master and slave drives Connector A 1 - IDE 40 pin Male Connector A 1 - SATA Power Female Connector A 1 - SATA Data 7 pin Female Connector B 1 - LP4 Female Connector B 1 - LP4 Male Maximum Transfer Rate 133MB/sec Connector Types 1 - LP4 Male Connector Types 1 - LP4 Female Connector Types 1 - IDE 40 pin Male Connector Types 1 - SP4 Male Connector Types 1 - SATA Data 7 pin Female Connector Types 1 - SATA Power Female Features: 48 bit addressing supports larger capacity drives Compatible with Ultra ATA 133 specifications Complete hardware solution no software needed. Works with PC MAC and Linux. Serial ATA 1.0 compliant Simple Plug and Play installation Supports all types of SATA storage devices. This all in one... Less

Lot of 12, 2 SATA III ports with software RAID + 1 IDE port, PCI-Express Card Bundle Deal: You get 12 cards for this price Product Details Compliant with PCI-Express Specification v2.0 and backward compatible with PCI-Express 1.x Compliant with Serial ATA Specification 3.0 Supports communication speeds of 6.0Gbps, 3.0Gbps and 1.5Gbps Hot plug and Hot Swap Supports Native Command Queuing (NCQ) Supports Port Multiplier FIS based switching or command based switching Supports ATA and ATAPI Commands Support RAID Function: RAID 0, RAID 1 ( only for SATA Harddrives) Chipset is a Marvell 88SE9128 2 Port SATA 6Gbps + One Port PATA PCI-Express Card

PCIE SATA III 6Gbps SATA III 2-Port Card With IDE PCIe 2-port SATA 6Gbps and 1-channel PATA RAID Controller. This SATA 6Gbps PCI Express RAID card is a controller board that supports both low profile and regular-size PCI in one card. The card easily adds SATA 6.0Gbps and PATA to your PC system, and supports RAID 0 and RAID 1 feature. Features / Specifications Compliant with PCI Express 2.0 Supports communication speed of 2.5Gbps and 5.0Gbps Compliant with serial ATA specification 3.0 Compliant with SATA 6G, 3G and 1.5G hard drives Hot plug and hot swap Supports port multiplier FIS based switching or command based switching Supports Native Command Queuing (NCQ) Supports RAID function: RAID 0 and RAID 1 Supports ATA/ATAPI-7 specification, supports ATA and ATAPI Commands Supports DMA... Less

Lot of 5, 2 Internal SATA II 1 IDE Ports PCIe PCI-e PCI Express Card, JMB363 Part Number: SY-PEX50039 Bundle Deal: You get 5 for this price Connects up to two SATA II and 2 IDE hard disk drives internally Specification JMB363 chipset (JMicron Technology Corporation) \Supports 1-Lane 2.5Gbps PCI Express Bus Ports: (Internal Native Interface Multiplexed)2 Internal SATA II Ports 1 Internal IDE (PATA) Port All Registers Accessible in Unified Memory Space Compliant with Serial ATA AHCI (Advanced Host

Convert 3.5 inch IDE/PATA hard drives and 5.25 inch optical drives to SATA. Connect IDE/PATA devices to your motherboards Serial ATA controller with this IDE to SATA converter. Supports 3.5 inch hard drives and 5.25 inch optical drives. Converter is compliant with Serial ATA specification and supports up to UDMA/133 drives. Manufacturer: Part Number: Compliant with Serial ATA specification Supports 3.5-inch and 5.25-inch IDE hard and optical drives ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150 Mbps Supports ATA PIO modes 0 to 4 and UDMA modes 0 to 6 Ultra low power consumption Plug & Play and Hot-swapping capability One (1) 40-pin IDE connector One (1) Serial ATA (SATA) port One (1) 4-pin power connector IDE to SATA Converter Adapter SATA cable

Converts Motherboard on board IDE to work with new SATA Hard Disk or Vis Versa Convert IDE Hard disk, CD-ROM, DVD to SATA interface or vis versa Everything you need, quick and easy to setup Bi-directional IDE <-> SATA Product Details Bi-Directional converter for Serial ATA and Parallel ATA. This Adapter Does-it-All, SATA Hard Drive to IDE Converter or IDE Hard Drive to SATA Host Converter. This is a bi-direction converter for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0.This converter supports 1.5GHz data rate. Product Specifications Jmicro JM20330 Chipset Plug & Play and Hot-swapping capability 150MB/s transfer rate... Less

Type: IDE to SATASpecification s: Connects up to two (2) SATA hard drives or optical drives into an IDE controller and eliminates the incompatibility between IDE and SATA devices in one easy step Uses dual Marvell bridge chipsets for best performance & compatibility Supports all SATA-I SATA-II and SATA-III devices; 2.5' 3.5' & 5.25' HDDs SSDs or ODDs Easily fits in any available IDE (ATA 40-pin) connector in cable free configuration (*no IDE cable required) Supports PIO Mode 0-4 Supports ATA Host Bridge Supports Serial ATA Power Save mode Plug-N-Play and Hot-swapping capability Operating System Requirements: 32-bit & 64-bit Windows 98SE/ME/2000/Serv er 2003/XP/Server 2003/Vista/Server 2008/Windows 7 Linux Mac OS X 10.2.x or abovePackage Contents: One (1) IDE to Dual SATA... Less

STARTECH.COM IDE TO SATA DRIVE MOUNTED ADAPTER Main Features Standard Warranty: 2 Year Manufacturer/Supp lier: StarTech.com Manufacturer Part Number: IDE2SAT Manufacturer Website Address: www.startech.com Brand Name: StarTech.com Product Name: 2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter Marketing Information: Connect your SATA drive to an IDE motherboard. This IDE/ATAPI to SATA adapter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port.The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer SATA drive and older motherboard designs, allowing you to connected newer SATA drives to a older IDE motherboard port and in turn eliminating the need to upgrade the motherboard for the sake of compatibility with the drives. Saving... Less

IDE to SATA Adapter 1 x 40-pin IDC Female; 1 x 7-pin Serial ATA Male Form Factor: Plug-in Card

Providing Excellent Service Since 1989 STARTECH.COM ide to SATA drive mounted adapter New-Retail Description: The perfect solution for adding SATA drives to motherboards lacking available SATA connectivity, while preserving space within the computer. Also ideal for use with older motherboards that do not provide SATA data or power connectors. IDE2SAT is a pure hardware solution and requires no drivers or software and is easy to install. Features: 48 bit addressing supports larger capacity drives

StarTech.com 2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter This IDE/ATAPI to SATA adapter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port.The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer SATA drive and older motherboard designs, allowing you to connected newer SATA drives to a older IDE motherboard port and in tern eliminating the need to upgrade motherboard for the sake of compatibility with the drives._x000D_ Saving time and hassle, the IDE to SATA adapter can be connected through simple plug and play installation and is backed by StarTech.com's Lifetime Warranty and free lifetime technical support. Manufacturer: StarTech.com Manufacturer Part Number: IDE2SAT Manufacturer Website Address: www.startech.com... Less

Providing Excellent Service Since 1989 STARTECH.COM ide to SATA drive mounted adapter New-Retail Description: The perfect solution for adding SATA drives to motherboards lacking available SATA connectivity, while preserving space within the computer. Also ideal for use with older motherboards that do not provide SATA data or power connectors. IDE2SAT is a pure hardware solution and requires no drivers or software and is easy to install. Features: 48 bit addressing supports larger capacity drives

Lindy IDE Converter for SATA Drives Plugs directly into a SATA drive 40 Way IDC Male (controller) to Serial ATA (drive) Power adapter cable included Supports SATA Generation 1 and 2 devices at speeds of 1.5 and 3GBps Fully compliant with SATA II 1.0 specification Supports HDD larger than 137GB Bridge converter supports PC, Mac and Linux Compatible with Ultra ATA 133/100/66/33 Plug & Play installation, no software required Dimensions: 75 x 26mm

Lot of 25, Converts an IDE port on motherboard or controller card for 2 SATA HD Part Number: SY-ADA45005 Converter an IDE port into 2 SATA ports Bundle Deal: You get 25 adapters for this price Enable old computer or controller card with IDE port to take up to 2 new SATA hard disk drive, CD-ROM, DVD or any other SATA devices. Specification JMicron JM20330 chipset Convert SATA devices to parallel ATA port Support SATA I and SATA II devices Compliant with Ultra DMA 100/133 specification IDE Port t

Search For: StarTech 2.5in and 3.5in 40 Pin Male IDE to SATA A Note: The condition of this item is New Mfr Part# IDE2SAT An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface, The StarTech 2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port. The StarTech 2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter offers a cost-effective solution

Convert your SATA Devices to IDE The Vantec SATA to IDE converter is an easy and convenient way that allows you to convert your SATA devices to the IDE standard. Mounted easily on the motherboard with an available IDE port, this mini converter turns your IDE port into a Serial ATA ready connector in a cost effective way. It works with Hard Drives, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc. Features: Converts SATA Devices (Hard Drive, CD-ROM, CD-RW, DVD ROM, DVD±RW, etc..) to IDE Connection Specifications: Model: CB-SP100 Interface: SATA TO IDE Dimensions: 55 x 13 x 55 mm Cable Length: 460mm Material: Plastic and Alloys System Requirements: Supports all operating systems with an available IDE Host Port. Package Contents: Single Port SATA to IDE Converter/ Serial ATA Cable/ 4-Pin Power Connector

Type: IDE to SATAFeatures: Serial ATA: Compliant with Serial ATA 1.0 48-bit sector addressing Parallel ATA: Ultra ATA/133 Parallel Interface 48-bit sector addressing Serial ATA Connector: Signal + Power Female Type Connector Parallel ATA Connector: Male IDE 2x20 pin Connector Transfer Rate: Supports PIO and DMA modes Supports bus master DMA at 1.5Gbps burst rate Operating System Support Windows 98 Windows NT 4.0 Windows 2000 Windows ME Windows XP Linux Master Slave device switchable Supports using 2 adapters (ATA/IDE devices) on the same ATA/IDE channelParts: 3 years limitedLabor: 3 years limited

SIIG s USB 2.0 to SATA/IDE is an excellent tool enabling you to connect a Serial ATA (SATA) or IDE/Ultra DMA hard disk drive to your notebook or desktop computer when no Serial ATA or IDE connection in available. It is designed to instantly convert SATA or IDE/Ultra DMA hard disk drives into a portable storage device through a USB port of your computer. The USB 2.0 to SATA/IDE Adapter accommodates 2.5 and 3.5 SATA or 2.5 and 3.5 IDE hard disk drives, delivers data transfer rates of up to 480Mb/s, and supports Ultra DMA 0-6 and Multi-word DMA 0-2. This USB 2.0 to SATA/IDE Adapter is compatible with most SATA and IDE hard disk drives of any brand up to 2TB capacity, and is the perfect handy gadget for use with notebook and desktop computers. The USB 2.0 to SATA/IDE is compliant with USB... Less

NEW Startech.com IDE2SAT25 IDE 40 pin Female/SATA Adapter number: IDE2SAT25, UPC: 065030832779) Manufacturer: StarTech.com Manufacturer Part Number: IDE2SAT25 Brand Name: StarTech.com Product Model: IDE2SAT25 Product Name: 40 Pin Female IDE to SATA Adapter Converter This IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a 2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive. The IDE to SATA Adapter is suitable for installation in any computer case, as it is requires minimal space and does not impact airflow. Product Type: Data Transfer Adapter Technical Information Connector on First End: 1 x 40-pin IDC Female Connector on First End: 1 x SP4 Male Connector on Second End: 1 x 7-pin Male SATA Physical... Less

Combo IDE(1) / eSATA(1) / SATA(2) PCI Card 1x e-SATA Ports 1x IDE (no Raid) 2x 32-Bit SATA If you need more data storage, this is the card for you. There is no BIOS on board. Will not boot up Windows from HD connected to this card. Key Features Chipset: VIA 6421 Single channel master mode hard disk controller supporting two enhanced IDE devices Redefined Bus Master Programming interface for IDE controllers to support up to four bus masters in a single function Supports ATA PIO mode 4, multi-word DMA mode 2 drivers and UltraDMA- mode6 Extension to Ultra DMA-133 interface for up to 133MB/s transfer rate Complies with ATA/ATAPI-6 Serial ATA Interface Complies with Serial ATA Specification Revision 1.0 Supports internal PHY with each PHY supporting up to two SATA devices Dual channel master... Less

IDE to SATA Drive Mounted Adap P/N: IDE2SAT Manufacturer: Startech.com Connect your SATA drive to an IDE motherboard. This IDE/ATAPI to SATA adapter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port.The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer SATA drive and older motherboard designs, allowing you to connected newer SATA drives to a older IDE motherboard port and in turn eliminating the need to upgrade the motherboard for the sake of compatibility with the drives. Saving time and hassle, the IDE to SATA adapter can be connected through simple plug and play installation and is backed by StarTech.com''s Lifetime Warranty and free lifetime technical support. SKU: IDE2SAT Product Type: Data Transfer Adapter Manufacturer:... Less

The perfect solution for adding SATA drives to motherboards lacking available SATA connectivity, while preserving space within the computer. Also ideal for use with older motherboards that do not provide SATA data or power connectors. IDE2SAT

IDE Controller to SATA Adapter - Use a SATA Drive on a IDE Controller! Use your IDE Controller to connect a SATA device! Featuring the Jmicron 20330 chipset, this device allows you to connect a SATA device to an IDE controller on your motherboard. It's compliant with ATA/ATAPI UDMA transfer up to UDMA 133 and supports SATA/150 drives. A jumper switch allows you to set this to master or slave depending on your needs. You can connect a SATA drive to any motherboard! This adapter is ideal for legacy boards but can also come in handy with newer motherboards. Buy a second adapter and you can set your SATA devices as master and slave on one IDE controller! General Features: Uses an IDE controller to connect SATA devices Jmicro 20330 chipset Serial ATA 1.0a specification compliant Supports... Less

Vantec Single Port SATA to IDE Converter: Converts SATA devices to IDE connection Mounts easily on the motherboard Easy and convenient Package contents: Single Port SATA to IDE Converter, SATA cable and 4-pin power connector

Startech 2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter - storage controller - SATA-150 - Ultra ATA 133 $16.99 StarTech.com 2.5in and 3.5in 40 Pin Male IDE to SATA Adapter Converter - Storage controller - SATA-150 - Ultra ATA 133 MacMall Part No.: 7388238 Manufacturer Part No.: IDE2SAT Manufacturer: Startech Product Overview Technical Specs Built tough, this heavy duty CD boombox is perfect for the jobsite, workshop or backyard. The rugged and durable design incorporates a water3 and dust resistant seal that protects your boombox from the elements. Easy to carry with its oversized handle, you will find the ZS-H0CP very easy to transport. iPod Compatibility Rock your iPod tunes through the rich, powerful bass and crisp stereo sound of this black CD/radio boombox with iPod player... Less