This long-life Battery Pak and Charger now has infinitely high-low control. Pulse width modulation extends battery life up to 10 hours in low setting yet gives a full 2.5 hours on high. Can be used on a vehicle battery with an optional connector. Built-in charger allows you to fully recharge the battery in 12 hours. Purge the area on high for 10 minutes, reduce to low speed (low-noise as well) and maintain fresh air for the whole work shift. Ideal for construction job sites to eliminate noisy gasoline-engine blowers. High-low control enables fast-purge ventilation and lower speed for maintaining safe work space. High impact case includes battery and built-in charger for overnight charging. Up to 10 hours of continuous operation. Lightweight and portable. 17.00 L. 15.00 W. 11.00 H.

Model SMP10C12X power supply converts a 115VAC 50/60Hz input, to a 12VDC @ 10 amp of continuous supply current output. Model SMP10PMC12X is a supervised version of this unit. Features 12VDC output 10 amp of continuous supply current output 115VAC 50/60Hz, 1.45 amp input Filtered and electronically regulated outputs Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup AC input and DC output LED indicators Lifetime Warranty. Enclosure Accommodates up to two (2) 12VDC/7AH batteries Dimensions: 13.5" H x 13" W x 3.25 " D 1/2 and 3/4 combination knockouts.

Technical Specifications : 1 AC input voltage 100-240VAC, Output 12V 1A(1000mA)2 Input frequency 50-60Hz 3 Smart device surge protection for over voltage, temperature and short circuit protection 4 Strong built for heavy duty and long usage performance 5 UL SA CE RoHS certified equipment Compatible Model # or Part #: Replacement Power Supply AC Adapter For Linksys Model No.: D12-1A Package Content:--- 1 AC Adapter (We are Specialists in OEM AC power adapter for many dev

Simplifies installations that do not require a conduit, Class 2 outputs standard and may be wired directly to 115VAC input Provides continuous regulated and filtered 12VDC or 24VDC (80-800) Designed specifically to support electric locks and access control systems Provides individual fused protection, field reset On/Off switch allows for easy service and inspection Fire alarm input provides release of fail-safe locks in case of emergency Field selectable outputs Auto-resetting circuit protection Battery charging circuit, PTC protection LED system status indicator Class 2 outputs Heavy gauge enclosure, 18 ga Low battery disconnect when batteries are below 70% capacity Painted Beige Finish

POWER SUPPLY 12VDC 16 OUTPUT 10 AMPS LARGE ENCLOSURE

Power Supply is designed with sixteen (16) individually fused outputs for powering CCTV Cameras and other video accessories. FEATURES: PS-16DC 16 Camera 12VDC Power supply 12 Volt DC Transformer 8 amp continuous current

Dual Output Dc Power Supply, Programmable, Output Volts 0 To 20 Dc, Output Current 0 To 5 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 0.5 Mvrms, Line Volts Regulation Less Than 0.01% + 3mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Voltage Protection, Parallel Or Series Connection, Display 4 Digit Vacuum Fluorescent, Includes Ac Power Cord And Instructions

60"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

Model SMP10 power supply converts low voltage AC input, to a 12VDC or 24VDC @ 10 amp of continuous supply current output. Dimensions (approximate): 7 x 4.25"W x 2.3"H Features 12VDC or 24VDC selectable output 10 amp continuous supply current Transformer requirements: - 28VAC/175VA for 12VDC @ 10 amp output (Altronix Model # T28140) - 28VAC/175VA for 24VDC @ 6 amp output (Altronix Model # T28140) - 28VAC/300VA for 24VDC @ 10 amp output (Altronix Model # T28300) Filtered and electronically regulated outputs Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup AC input and DC output LED... Less

POWER SUPPLY./CHARGER-12 VDC @ 4AMP OR 24VDC @ 3AMP UL LISTED GREY

Field Selectable Voltage 12VDC-5AMP or 24VDC-3AMP Filtered and Regulated DC Output Jumper Selectable Auto or Manual Reset (PDD-FT model only) Short Circuit Protection Low Battery Monitor and AC Fail Output Relay Modular Options Built-in Electrical Outlet (110 VAC) Auto Sensing AC Input (90-250 VAC) Fire Panel Interface with Switching Output Drop Down Lid Can be Used for a Work Surface "End of Line??? Resistor Supervision on Fire Interface Selectable Ground Fault Detection on Fire Interface Multi Panel Interconnect- Fire Disconnect External AC Power Indicator OPTIONS & ACCESSORIES Power Supply c/w Power Distribution Device-Fire Trigger 1-Output Power Distribution Device 8-Output Power Distribution Modules 4 & 8-Output (Fused or PTC-Auto Reset Breaker) ... Less

Single Output Dc Power Supply, Manual, Output Volts 0 To 30 Dc, Output Current 0 To 5 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 1 Mvrms, Line Volts Regulation Less Than 0.01% + 2 Mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Current And Over Voltage Protection, Parallel Or Series Connection, Display 3 Digit Lcd With Backlight, Includes Ac Power Cord And Instructions

5V adapter power supply F LINKSYS WEBCAM WVC54G WVC54GC Replacement 5 V 3A 15W AC Adapter Will work with most devices that use a 5V 3A or lower AC adapter with standard 2.5mm tip. Specifications: Input: 100-240V~0.6A, 50/60Hz Output: 5V 3000mA 15W Max Tip Size: 2.5mm x 5.5mm (Inner diameter x Outer diameter) Package Content: 5 V 3A AC Adapter Payments We accept PayPal payments! You have to arrange a payment in 5 days. Otherwise your order will be cancelled We will file non-paying bidder warning

Single Output Dc Power Supply, Manual, Output Volts 0 To 30 Dc, Output Current 0 To 3 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 1 Mvrms, Line Volts Regulation Less Than 0.01% + 2 Mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Current And Over Voltage Protection, Parallel Or Series Connection, Display 3 Digit Lcd With Backlight, Includes Ac Power Cord And Instructions

Package Includes: 1pc AC Adapter. Features and Specificatoin: Worldwide Input Voltage: 100-240VAC/50-60Hz Output Voltage: 12V Intelligent chip inside Output Protection: Complete OVP, OCP, SCP Protection: OVP: Over Voltage output Protection OCP: Over Current output Protection SCP: Short Circuit output Protection High efficiency and low power consumption In great working condition Safety Approval: CE, CCC, RoHS Condition: Brand New. Cisco Linksys E4200 E3200 Wireless-N Router

Single Output Dc Power Supply, Manual, Output Volts 0 To 35 Dc, Output Current 0 To 1.5 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 200 Uvrms, Line Volts Regulation Less Than 0.01% + 2 Mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Current Protection, Parallel Or Series Connection, Display 3 Digit Vacuum Fluorescent, Includes Ac Power Cord And Instructions

SNAP power supplies provide the best source of AC or DC power for your Opto 22 SNAP PAC hardware. Packaged in a compact and sturdy housing, SNAP power supplies include a built-in fuse, an LED status indicator, and an on/off power switch for ease of use. The SNAP-PS5 power supply is designed to provide 5 VDC power for a SNAP PAC rack with an I/O processor (SNAP PAC brain or R-series controller) and I/O modules mounted on the rack. The combination of a rack, processor, and modules is called an I/O unit. Opto 22 recommends using one SNAP power supply for each I/O unit. Choose the power supply based on the load required for the I/O unit. Each SNAP power supply can be mounted in one of two ways: next to the SNAP I/O unit it powers, using the standard panel-mounting base, or directly on a DIN... Less

Advantages Patented By-pass with strainer Operates below 50F Operates effectively at all salt levels between 2000 and 35,000 PPM 25% more power than any other power supply One power supply 3 cell choices 3 Power output levels Selectable reversing rate Pools up to 20,000 Gal. Chlorine ratings based on a pump run time of 8 Hrs. Competitors chlorine ratings are based on a pump run time of 24 Hrs. LED readout Soft Touch Controls Multiple boost cycle Blades of cell use 40% more coating than competition Accurate salt reading Patented temperature compensation Dual Axis power optimizer Operates at temps of 104F Life-Time trade-in value on cell Manufactured in the USA 26 Years manufacturing Self-Cleaning Salt Chlorine Generators Chlorine output Savings ST-36 = 10-11 Tablets per week ST-48 = 12-15... Less

GE 300382001 Spare Part - Power Supply, 12Vdc at 6 Amps, No Battery, No Enclosure On sale now for $174 .GE Security is a part of UTC Fire & Security, which provides fire safety and security solutions to more than 1 million customers worldwide. GE Security has operations in more than 30 countries and is represented by some of the best-known brand names for intrusion and fire detection, access and building control, video surveillance, explosive and drug detection, Security Management, and structured wiring.

72"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

Single Output Dc Power Supply, Programmable, Output Volts 0 To 20 Dc, Output Current 0 To 8 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 0.5 Mvrms, Line Volts Regulation Less Than 0.01% + 3mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Voltage Protection, Parallel Or Series Connection, Display 4 Digit Vacuum Fluorescent, Includes Ac Power Cord And Instructions

Single Output Dc Power Supply, Manual, Output Volts 0 To 8 Dc, Output Current 0 To 6 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 200 Uvrms, Line Volts Regulation Less Than 0.01% + 2 Mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Current Protection, Parallel Or Series Connection, Display 3 Digit Vacuum Fluorescent, Includes Ac Power Cord And Instructions

Single Output Dc Power Supply, Programmable, Output Volts 0 To 20 Dc, Output Current 0 To 5 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 0.5 Mvrms, Line Volts Regulation Less Than 0.01% + 3mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Voltage Protection, Parallel Or Series Connection, Display 4 Digit Vacuum Fluorescent, Includes Ac Power Cord And Instructions

Mitel IP Phone Power Supply (48VDC) The Mitel IP Phone Power Supply provides power to Mitel 5200 and 5300 series IP telephones when PoE is not available. Features Universal AC Input RJ45 type connectors accept D8W modular plug cables Input 100-250 V, 50-60 Hz, 500 mA Output +48 V Power LED Includes power cable and CAT5E cable Compatibility Mitel 5207, 5212, 5215, and 5235 IP phones Mitel 5312, 5324, 5330, 5340, and 5360 IP phones Buy with Confidence. Your order also includes: MetrolineDirect's Rock Solid One Year Warranty

Single Output Dc Power Supply, Manual, Output Volts 0 To 60 Dc, Output Current 0 To 1 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 200 Uvrms, Line Volts Regulation Less Than 0.01% + 2 Mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Current Protection, Parallel Or Series Connection, Display 3 Digit Vacuum Fluorescent, Includes Ac Power Cord And Instructions

Altronix AL600UL3X Triple Voltage Power Supply/Charger - Class 2 power limited outputs 5VDC & 12VDC at 1.75 amp & 24VDC at 3 amp non power limited output, AC & battery monitoring, encl. 15.5?H x 12?W x 4.5?D, 115VAC input, UL Listed (UL294/UL1481), cUL Listed, CSFM & MEA Approved.

SNAP power supplies provide the best source of AC or DC power for your Opto 22 SNAP PAC hardware. Packaged in a compact and sturdy housing, SNAP power supplies include a built-in fuse, an LED status indicator, and an on/off power switch for ease of use. The SNAP-PS5U power supply is designed to provide 5 VDC power for a SNAP PAC rack with an I/O processor (SNAP PAC brain or R-series controller) and I/O modules mounted on the rack. The combination of a rack, processor, and modules is called an I/O unit. Opto 22 recommends using one SNAP power supply for each I/O unit. Choose the power supply based on the load required for the I/O unit. Each SNAP power supply can be mounted in one of two ways: next to the SNAP I/O unit it powers, using the standard panel-mounting base, or directly on a DIN... Less

12VDC or 24VDC selectable output. 4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output. Class 2 Rated power limited output. 115VAC 60Hz, 1.45 amp input. Filtered and electronically regulated outputs. Short circuit and thermal overload protection. Built-in charger for sealed lead acid or gel type battery backup. Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators. AC fail supervision (form "C" contact rated @ 1 amp 28VDC). Low battery supervision (form "C" contact rated @ 1 amp 28VDC).

Single Output Dc Power Supply, Programmable, Output Volts 0 To 50 Dc, Output Current 0 To 7 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 500 Uvrms, Line Volts Regulation Less Than 0.01% + 2 Mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Current And Over Voltage Protection, Parallel Or Series Connection, Display 4 Digit Vacuum Fluorescent, Includes Ac Power Cord And Instructions

Single Output Dc Power Supply, Programmable, Output Volts 0 To 30 Dc, Output Current 0 To 7 Amps, Current Limits 0 To 100%, Ripple Volts Regulation Less Than 350 Uvrms, Line Volts Regulation Less Than 0.01% + 2 Mv, Meter Type 2 Digital, 120vac Input Voltage, Input Frequency 47 To 63 Hz, Over Current And Over Voltage Protection, Parallel Or Series Connection, Display 4 Digit Vacuum Fluorescent, Includes Ac Power Cord And Instructions