450 watts output power capacity 5 outlets back-up 5 outlet surge protection 1 data port (RJ45) 11.3 minutes back-up time at half load Surge rating 365 Joules Power save feature eliminates phantom loads Reduces energy consumption $75,000 lifetime equipment protection 3 year warranty

A high performance and reliable upgrade or replacement power supply for desktop PCs. The Professional series of power supplies provide a high-quality and reliable upgrade or replacement option for a variety of Intel or AMD-based ATX desktop computer systems. Compliant with the industry standard ATX specification and using the standard ATX form-factor this power supply (PSU) can be used as a replacement or upgrade in a variety of popular OEM desktop systems. Conforming to ATX revision 2.03 this power supply features a 20-pin ATX power connector and 6-pin AUX power connector for support for older legacy computer systems as well as some newer low powered systems with it s ATX12V connector. High quality components and a built in 80mm dual ball-bearing cooling fan lend to a durable heavy duty... Less

The PLUS220 power supply is similar to the current model in that it is a 50Watt, auto-ranging (90- 260VAC, 50-60Hz input) supply with a 20VDC output. However, the new cord is improved by the utilization of an earth-grounded C5 type plug, which includes three prongs rather than two.The PLUS220 power supply and its cord are matched only to each other, and are not compatible with the current power supply/cord using a C7 type plug. The PLUS220 supply/cord is the same length as the current unit (about 6 feet or 1.83 m), and the power supply (brick) is slightly smaller than the current unit.

Model SMP10 power supply converts low voltage AC input, to a 12VDC or 24VDC @ 10 amp of continuous supply current output. Dimensions (approximate): 7 x 4.25"W x 2.3"H Features 12VDC or 24VDC selectable output 10 amp continuous supply current Transformer requirements: - 28VAC/175VA for 12VDC @ 10 amp output (Altronix Model # T28140) - 28VAC/175VA for 24VDC @ 6 amp output (Altronix Model # T28140) - 28VAC/300VA for 24VDC @ 10 amp output (Altronix Model # T28300) Filtered and electronically regulated outputs Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup AC input and DC output LED... Less

Specification Mfr Part Number: ATX-350PN-B204 Features: Complied with ATX12V 2.0 standard High efficiency Low noise and ripple and reliability Remote On/Off function Internal 12V DC 120mm fan included Noise Killer (Thermal fan speed control function) Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage short circuit and over current protection 100% Hi-pot ATE and burn-in tested Re-settable power shut down Approved by UL 60950 TUV IEC 60950 NEMKO + CB Report With 20pin and SATA connectors Input: Input Range: 100 132 Vrms or 200 264 Vrms manual selection Frequency: 47 63 Hz Input Current: 8A (RMS) @ 115Vrms/60Hz 4A (RMS) @ 230Vrms/50Hz Inrush Current: 100A Max cold start 120A Max warm start measured at 264Vrms/50Hz Output: Total Watts: 350 W +3.3V and +5V... Less

PS26KXDescription Perfect for Home, Shop and HobbyistBuilt-in Cooling FanInput: 115V AC, 60Hz, 500 WattsOutput: 6~15V DC(Adjustable)22 AMP Constant/25 AMP SurgePowers 6~15V DC Devices such as Cellular Phones, CB Radios, Scanners, HAM Radios, Autosound Systems, etc.Screw Terminal ConnectorsCrowbar Over Voltage ProtectionShort Circuit & Thermal ProtectionFuse ProtectedLED Condition Indicators3 Prong Grounded AC PlugHeavy Duty Cabinet & Heatsink with Anti-Skid Rubber FeetElectronic Overload Protection w/Auto ResetDimensions: 11.81"L x 9.05"W x 7.08" HSpecifications: AMP Gauge: 3 ProngAmps - Output: NoConnection Type: 1Outlet Qty: 22APower - Output (Watts): 25APower - Peak (Amps): 120VPower - Surge Rating: 12vVoltage - Input Range (Volts): No

Features:. Easy to check ATX power supply. Aluminum case. Accurate voltage indicator +/- 0.1V (+12V1/+5V/+3. 3V/5VSB/+12V2/- 12V). ATX P.G. value display. Lower or higher P.G. values alarm. ATX output connectors check. Lower voltage detected alarm. Over voltage alarm. No voltage detected alarm. Manual:. Plug-in your ATX power 24 pin and plug-in (P4/P6/P8) into the tester. Turn on your ATX power supply. LCD shows each voltage and P.G. value on the screen automatic and you can hear 2 beep sounds. ATX power output connector checking one by one. If power output is working the LED will light on. If power output failed the LED will not light on. Plug-in (HDD/Floppy) connector and check LED light (+12V1/+5V). Plug-in Sata connector and check LED light (+12V1/+5V+3. 3V). Remove the connector... Less

The HP Procurve 620 Is An Ac Powered 1u Package That Connects To A Network Switch Through Cables To Provide The Switch With One Or More Of The Following: Redundant 12v Power For The Network Switch Circuitry, Redundant Poe Power For Poe Devices Connected To A Poe Network Switch, Extended Poe Power For Poe Devices Connected To A Poe Network Switch. The HP Procurve 620 Utilizes Three Internal Power Supplies, And If Any One Of Them Fails, The Unit Will Continue To Report Its Status To All Connected Switches. It Will Continue To Provide Support To The Extent Possible With The Power That Remains Available.

This is the ideal solution for delivering stable power to the most demanding devices. You can rest assured that this power supply will be as dependable as you need it to be. Compatibility with existing standards as well as a generous number of accessory connectors to maximize your configuration possibilities. Automatic temperature- controlled fan keeps the power supply quiet during low power demand. High performance components and connectors are designed for extra long life and provide maximum system performance improves system reliability by providing stable power to all components.

Model SMP10C12X power supply converts a 115VAC 50/60Hz input, to a 12VDC @ 10 amp of continuous supply current output. Model SMP10PMC12X is a supervised version of this unit. Features 12VDC output 10 amp of continuous supply current output 115VAC 50/60Hz, 1.45 amp input Filtered and electronically regulated outputs Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup AC input and DC output LED indicators Lifetime Warranty. Enclosure Accommodates up to two (2) 12VDC/7AH batteries Dimensions: 13.5" H x 13" W x 3.25 " D 1/2 and 3/4 combination knockouts.